Permits 101Updated Nov 14, 20266 min read

How Much Does a Retroactive Permit Cost in LA? (2026)

Normal fee + penalties

A retroactive permit in LA costs the normal permit fee plus penalties for working without one — LADBS typically doubles the fee. See every cost, a real example, and how to keep it down.
On this page
Key takeaways
  • A retroactive permit costs the normal permit fee plus an investigation fee — LADBS typically doubles the permit fee (min ~$400, LAMC §98.0402).
  • You still pay the usual plan-check and trade fees, plus as-built plans and any corrections to pass inspection.
  • If a code case is opened, add a ~$356 Code Violation Inspection Fee (§98.0421); miss an Order-to-Comply deadline and it’s a $660 penalty (§98.0411).
  • Coming forward voluntarily — before a complaint or a sale — keeps the cost at the low end.
  • Use the fee calculator for your base permit fee, then roughly double the permit portion.

The short answer

A retroactive permit (also called an after-the-fact permit) is the permit you pull after work is already built. It costs everything a normal permit costs — plus a penalty for not permitting it upfront. In Los Angeles that penalty is an investigation fee, and the practical rule of thumb is simple: expect to roughly double the permit fee.

What makes up the cost

Four things stack up:

  • The normal permit fees. Building permit fee, plan check, and any electrical, plumbing, or mechanical trade fees — the same fees you’d pay doing it the right way. Get your number from the LA permit fee calculator.
  • The investigation fee — this is the penalty. Under LAMC §98.0402, LADBS doubles the permit fee when work was done without a permit, with a $400 minimum. This applies whether you come in voluntarily or get caught.
  • As-built plans. You usually need drawings of what was actually built, prepared by a draftsperson, designer, or engineer. Cost depends on the size and complexity of the work.
  • Corrections. Whatever it takes to make the work safe and pass inspection — sometimes a few fixes, sometimes opening up walls so an inspector can verify framing, wiring, or plumbing.

Extra penalties if you wait to get caught

The numbers above assume you come forward on your own. If a neighbor complaint or a sale opens a code-enforcement case first, two more charges can appear:

  • Code Violation Inspection Fee — about $356 (LAMC §98.0421) when there’s an open violation.
  • Order-to-Comply penalty — $660 (LAMC §98.0411) if you miss the compliance deadline, plus late fees.

This is why acting early matters: the same permit is cheaper when you initiate it than when the city does. (Always confirm current fee amounts with LADBS — they’re updated periodically.)

A realistic example

Say a garage conversion would normally carry around a few hundred to a couple thousand dollars in LADBS permit and plan-check fees. For a retroactive permit, you pay those fees and the investigation fee doubles the permit portion — so the LADBS side alone is meaningfully higher. Add as-built plans and any corrections, and the all-in cost is typically in the low thousands. The exact figure depends entirely on your scope, which is why the fee calculator is the fastest way to anchor it, then double the permit line.

How to keep it down

  • Come forward before a complaint or a sale. That avoids the $356 and $660 enforcement charges.
  • Keep the scope clean. Legalizing exactly what exists is cheaper than redesigning it.
  • Use pre-approved or simple plans where you can to cut drafting and plan-check cost.
  • Get one pro to handle it end to end — plans, permit, and inspections — so nothing stalls.

Is it worth it?

Almost always, yes. Unpermitted work must be disclosed at sale, usually can’t count toward your legal square footage, and can be ordered removed if caught. The cost of a retroactive permit is small next to the hit to your sale price or a forced tear-out. For the full process, see how to legalize unpermitted work in LA, and what happens if you remodel without a permit.

Frequently asked questions

How much more does a retroactive permit cost than a normal one?

Expect roughly double. LADBS charges an investigation fee that doubles the permit fee when work was done without a permit, with a minimum around $400 (LAMC §98.0402). You still pay the normal plan-check and trade fees on top, plus as-built plans and any corrections.

What is the investigation fee?

It’s the penalty LADBS adds when a permit is needed to bring a property into compliance. Under LAMC §98.0402 the permit fee is doubled at issuance, with a $400 minimum. It applies whether you come forward voluntarily or get caught.

Are there extra penalties if I get a code violation notice?

Yes. If a code-enforcement case is opened you may also pay a Code Violation Inspection Fee (about $356, LAMC §98.0421), and if you miss the deadline on an Order to Comply, a $660 penalty (LAMC §98.0411) plus late fees. Coming forward before a complaint usually avoids these.

Is it cheaper to just not pull a retroactive permit?

No. Unpermitted work has to be disclosed when you sell, usually can’t count toward legal square footage, and can trigger forced removal if caught. The cost of legalizing is almost always far less than the hit to your sale price or a code-enforcement order.

Get a legalization roadmap for your property

Tell us about the property. A real person reviews every submission.

We only use your details to follow up about your project.

Related guides