Systems & tradesUpdated Nov 14, 20266 min read

SolarAPP+ in LA: Instant Solar Permits Explained (2026)

Same-day for eligible systems

SolarAPP+ is an automated plan-check tool that can issue an LA solar permit same-day for eligible standard rooftop systems. Here is how the flow works.
Permit type
Plan check
Typical timeline
14–45
business days
Typical project value
$12K–$50K
On this page
Key takeaways
  • SolarAPP+ is an automated plan-check tool that can issue an LADBS solar permit same-day for eligible standard residential rooftop systems.
  • Without it, typical permit issuance runs about 2 to 4 weeks after plans are submitted.
  • Standard rooftop PV qualifies; battery/ESS, unusual roofs, and structural questions still need manual LADBS review.
  • The permit is separate from LADWP interconnection — both are required before the system can be turned on.
  • A legitimate installer pulls the permit; unpermitted solar gets no interconnection and costs more later.

What is SolarAPP+?

SolarAPP+ is an automated code-compliance tool that Los Angeles supports under California’s streamlined solar permitting, and for an eligible standard residential rooftop solar system it can issue the LADBS permit the same day. It replaces the human plan check with an instant software check — so instead of waiting the usual 2 to 4 weeks after submission, an eligible project gets its permit in one sitting.

That is the whole point of it. The slow part of a solar job has rarely been the installation; it has been the permit review queue. SolarAPP+ removes that queue for the straightforward systems that make up most residential rooftop installs.

How does the instant-issuance flow work?

An installer enters the system details into SolarAPP+, and the tool runs them against the electrical and building code automatically. If the design passes, SolarAPP+ issues a compliant permit on the spot — no plan reviewer, no appointment, no back-and-forth.

From there the job proceeds like any other LADBS permit: the work gets built, and an inspector verifies it in person before it is signed off. The automation handles the paperwork at the front end; the physical inspection at the end does not change.

Which solar systems qualify for SolarAPP+?

Standard residential rooftop photovoltaic systems are the ones that qualify. That is the lane SolarAPP+ was built for — a typical panel array on a typical house, wired to standard residential electrical service.

Several things push a project out of that lane and back into manual LADBS review:

  • Battery or energy storage. A battery needs its own Energy Storage System (ESS) permit and triggers an LAFD fire-setback review, so it is handled separately. See the solar battery permit in LA.
  • Structural questions. An older roof or one with load concerns needs a human to look at the framing.
  • Unusual roofs or non-standard systems. Ground mounts, odd configurations, and anything the automated check cannot clear fall out to manual review.

When a project falls out, it is not a rejection — it just follows the normal LADBS plan-check path, which runs about 2 to 4 weeks. For the baseline requirements either way, see whether you need a permit for solar panels in LA.

Not sure if your system qualifies?

Tell us your scope on the get-quote page and we’ll connect you with LA installers who use SolarAPP+ for the standard jobs and know when a project needs manual review instead.

Does a SolarAPP+ permit let me turn the system on?

No. The SolarAPP+ permit is the LADBS approval to build, and that is a different thing from permission to produce power. LADWP interconnection approval is a separate process, and both the permit and interconnection are required before the system can be energized or export power to the grid.

So the instant permit speeds up the start of the project, not the finish. The LADWP interconnection step still runs on its own schedule, and it is the gate between a built system and a system that is actually feeding the grid.

How does a homeowner actually use SolarAPP+?

Through the installer, mostly. A legitimate LA solar installer pulls the LADBS permit as part of the job, and for an eligible standard system that means they run it through SolarAPP+ and hand you a same-day permit. You do not file it yourself.

What you should expect to see is the permit on record — every rooftop solar install in LA requires an LADBS building and electrical permit, and a real installer pulls it. If anyone offers to skip it to save time, that is the warning sign, not the shortcut.

What happens if solar is installed without a permit?

LADWP will not interconnect an unpermitted system, so it cannot legally export power to the grid. And the problem compounds at resale: an unpermitted install triggers retroactive permitting at 2× the permit fee plus a roughly $356 Code Violation Inspection Fee under LAMC §98.0421.

That is the real argument for the permit, and it is why the instant SolarAPP+ path matters — it removes the main reason people were ever tempted to skip it. For what retroactive permitting runs, see how much a retroactive permit costs in LA. Fees vary — confirm with LADBS, and use the Permit360 fee calculator or the solar permit cost guide for an estimate.

Frequently asked questions

What is SolarAPP+?

SolarAPP+ is an automated code-compliance tool that Los Angeles supports under California’s streamlined solar permitting. For an eligible standard residential rooftop solar system, it runs the plan check instantly and issues the LADBS permit the same day, instead of the usual 2 to 4 week wait.

Which solar systems qualify for an instant SolarAPP+ permit?

Standard residential rooftop photovoltaic systems qualify. Anything outside that lane — battery or energy storage, an unusual roof, structural questions, or a non-standard configuration — falls out of SolarAPP+ and goes to manual LADBS plan review instead.

Does a SolarAPP+ permit mean I can turn my system on?

No. The SolarAPP+ permit is the LADBS approval to build. LADWP interconnection is a separate approval, and both the permit and interconnection are required before the system can be energized or export power to the grid.

Does SolarAPP+ cover my battery?

No. Battery and energy storage needs its own Energy Storage System (ESS) permit and triggers an LAFD fire-setback review, so it goes through manual LADBS review rather than the instant SolarAPP+ path.

What does a SolarAPP+ permit cost?

Fees vary — confirm with LADBS. The instant path changes the speed of issuance, not the fee structure. Use the Permit360 fee calculator for an estimate tied to your scope.

Ready to get it done?

Get matched with licensed LA pros for your solar panel installation — free, no obligation. They can price it exactly and pull the permit for you.

Get free quotes

Related guides